Handicap Ramp Projects

For technical design criteria, download the deck, stair and ramp details pamphlet (PDF).

Required Permits

Application Submission Requirements

  • Client Registration Form (PDF) - Required if a contractor who has never performed work in Chesterfield County before is applying for the permit.
  • Residential Building Permit Application (PDF).
  • Plot plan showing setbacks from existing and proposed improvements. Acceptable plot plans contain the following:
    • Entire property, showing all property line dimensions
    • Existing dwelling, any other existing structures and the proposed structure location (clearly indicate all proposed structure dimensions). For proposed accessory structures, indicate the overall height.
    • Setbacks from the closest point of the proposed structure to property lines in each direction. Label the measurements from each property line to the closest point on the structure. Be as exact as possible and clearly label the road name.
  • Construction plans (two or more copies) - We'll return one copy to you with the issued permit.
  • Residential Plans Review Delivery Form (PDF) - Indicates whether you want the permit and forms mailed to you or held for three days at the Building Inspection office for you to pick up.
  • Permit and other related fee payments

Construction Plan Requirements (two or more copies)

  • Attachment of the ramp to the structure details
  • Floor plan and floor framing
  • Footing details
  • Guard rail and picket framing details
  • A plat showing the location of the new addition to existing property lines
  • Support post location and size

Plan Detail Requirements

General Requirements for all Construction Drawings

  • Numbered - Number each plan sheet.
  • Scale - Draw structural plans to architectural scale (typically 1/4 inches, 3/16 inches or 1/8 inches).
  • Legible - Make sure the plans are neat and legible (no handwritten notes).
  • Orientation - Lay out all drawings in the same orientation (portrait or landscape).

Plan Views

You need plan views for:

  • Footing and foundation.
  • Elevations and framing.

Show the following details:

  • Perimeter and interior dimensions
  • All beams identified. For all beams carrying more than 4,000 lbs., identify the column on each end.
  • Size and direction of all joists
    • For I-joists or open-web joists, provide manufacturer's layout plan.
    • Identification on plans similar to:
      • Nominal lumber: 2 by 8 SYP at 16 inches on center (o.c.)
      • I-joists: Truss Joist, Series 230, 11 feet 7/8 inches, 16 inches o.c.

Elevations

Two elevations (from the front and side)